MC13-353118 - MoTeC Module Signal Converter MoTeC DMC-D Dual Mag Converter
MC13-353118 - MoTeC Module Signal Converter MoTeC DMC-D Dual Mag Converter
- Stock: Available
- Model: MC13-353118
- Weight: 24.50g
- SKU: MC13-353118
- UPC: MC13-353118
- MPN: 53118
£81.32
Magnetic Sensor Amplifiers - The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor behave as a switched or Hall Effect sensor, to make the signals suitable for use with MoTeC ECUs and loggers.
This allows magnetic sensors to be used in applications where previously a Hall sensor was required, for example when using the digital inputs on an ECU to measure wheel speed.
A single DMC can convert two independent magnetic sensor signals.
The DMC comes in 4 versions, each having different trigger levels according to the requirements of the intended application.
DMC B
This version is intended for engine trigger sensors that have insufficient amplitude to trigger a logic level input.
Minimal filtering avoids delays in the signal. The trigger level does not vary significantly at normal operating frequencies.
Magnetic Sensor Amplifiers - The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor behave as a switched or Hall Effect sensor, to make the signals suitable for use with MoTeC ECUs and loggers.
This allows magnetic sensors to be used in applications where previously a Hall sensor was required, for example when using the digital inputs on an ECU to measure wheel speed.
A single DMC can convert two independent magnetic sensor signals.
The DMC comes in 4 versions, each having different trigger levels according to the requirements of the intended application.
DMC D
This version is intended for magnetic wheel speed sensors.
The signal should be symmetrical around zero volts.
Heavy filtering minimises the possibility of interference, resulting in significant variation of the trigger level with frequency.The DMC-D converts signals from two magnetic speed sensors into Hall Effect signals, suitable for digital inputs. The DMC-D is housed in a 12-way DTM male connector, so requires a 12-way DTM female connector (not supplied) for wiring loom interface.
Connector Housing Attributes | |
Total Contacts | 12 |
Tooling & Related Products
Image | Product | Price | Quantity | Add | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mating Connector Options | ||||||||||||||||||||
Mating Connector | ||||||||||||||||||||
MoTeC DTM Connector 12 Way Female Kit for DMC-D | £19.26
|
|